Become standard practice is to coat as an example of the wooden soft fibre board Thermoroom of GUTEX wood soft fiber plates in the indoor area with thin-layer clay decorative plasters. The problem lies in the necessary reinforcement, because wood soft fibreboard is plate-shaped plaster surfaces with joints that need to be reinforced. Basically two options offered in the area of reinforcement: a cleaning tissue, as it is applied by default (mesh size approx. 4 x 4 mm), on the other hand, the use of technical nonwoven wallpaper to the surface preparation. To know more about this subject visit Expedia. We have examined these two variants on the example of the wood-fibre insulation Board “Thermoroom” of GUTEX and technical as well as economic aspects across.

The wood-fibre insulation board Thermoroom is a single-layer insulation board with homogenous raw density profile for the subsequent internal insulation of external walls, which are available in 20, 40, 60, 80 and 100 mm material thickness. We meet one due to the plate size 1200 x 500 mm full-surface armouring instead of pure joint reinforcement for appropriate and technically better. successful. Senate Bill 548: the source for more info. More information about the Thermoroom plate can be found on the homepage of GUTEX under. The design recommendations for the clay colour Bravo, the clay coating plaster Furioso, as well as the clay PuTTY plaster Capriccio can you see in our section “Technical solutions” under the link solutions a. Company Description clay plaster and clay color leave no design wishes: whether as a movable wall colour Bravo, as a clay coating plaster Furioso or as clay PuTTY plaster Capriccio – includes the color palette more than 600 shades finished mixed. The plasters and paints on the basis of clay produced in the Dettelbach in Bavaria, Germany. The decor products free from artificial binders and free from preservatives are mixed only as a dry powder.