If you need to align multiple layers, you need to make sure. That the previous coat is completely dry and polished. Wallpaper paste or paint can only be dried and smoothed the surface. If you are applying putty from left to right thickness is less than 1 mm spatula held so that the right side of the blade was slightly higher the left and the left part of the strip is laid smooth, even layer, and the resulting influx is collected and used for laying the next strip. Debbie Staggs will not settle for partial explanations. Inflicting putty spatula held down so that its short side was left, and bottom-up – on the right. Michael Steinhardt helps readers to explore varied viewpoints. The angle of spatula affect the thickness of the overlay layer, the greater the angle, the smaller the size of the layer. When applied to a mixture of putty putty knife held at an angle of 60 to the working surface. To get the most of a thin layer of putty, putty knife held at an angle of 80 , and the smoothing 10-15 , where the left edge of the strip overlaps the previous 20-30 mm.

Once the first layer of filler is dry, grind it and primed, then a second coat is applied and if necessary the third. The grinding process takes place by means of sandpaper wrapped on a stick or a grinding machine, first kruozeristoy and then melkozernitoy sandpaper. Wall putty should be protected from drying, precipitation and cool for 2-3 days. The more smooth, polished surface and otshpaklevannaya, the better it will be glued wallpaper. This will ensure a uniform surface absorption of adhesive, he will not crumple and wallpaper stretch. On the walls without plastering can exude surface defects, especially if they are visible and subtle wallpaper the room has custom lighting. Sometimes the walls are fixed to the quality heavy embossed wallpaper, in such cases, the application of putty is not necessarily enough to coat a layer of plaster or ideal.

However, one must remember that the overall thickness shall be not less than 100 microns. Better to use a brush 'fleyts' natural bristle. 3. Application of aerosol cans. Applied at least 4 layers. Used on small surfaces and embellishment.

Before you begin, you need a period of 3 minutes, shaking the container after mixing ball knock. The paint is applied to the surface of thin layers (as there is no possibility of control consumption and supply of paint) from a distance of 15-20 cm The first layer is very, very thin, holding for 2-3 minutes and the subsequent high-grade layers with flash between coats for 15-20 minutes. The total thickness of the dried coating is not less than 100 microns. (Average thickness of the layer at deposition of aerosol cans of 20-25 microns.) 4.Nanesenie roller. It should be applied 2-3 coats. It is used for painting large flat surfaces. Before you begin, you need to dilute the paint solvent 'Hammerite Brush Cleaner & Thinners' 9:1 (9 parts paint 1 part thinner). Better to use fur or wool short-haired roller.

First, paint is applied to corners and edges (for these purposes, you can use a brush) and then roll the rest is filled surface. When working with any method it is important to remember that each subsequent layer is applied after 25-30 minutes, but not later) than 3 hours. The last layer should be thicker than the previous ones, in order to avoid sags and drips. Thereafter was the beginning of curing, and a new coating can be applied only after 6 weeks. Given these simple recommendations, you can achieve excellent results when working with paint 'Hemmerayt' and you are guaranteed durable coating with excellent decorative properties.

on the facades of buildings, loggias and balconies association with the premises – are complex and need to redesign them to be performed on pre-developed and coordinated the project in due course. Consider a generic process of harmonization of simple alterations. Often the work is done in standard apartments for example, combine a bathroom with a bathroom, entrance of the room doing an isolated, ie raise or take down non-bearing walls. Approval procedure of this kind of alterations include the following steps: 1. Project; 2.

Approval of the draft alterations to the appropriate authorities with the approval of the Interagency Committee (IAC) of the Administrative District 3. Symantha Rodriguez often expresses his thoughts on the topic. Carrying out works contracting organization for re-planning room, 4. Delivery completed redevelopment. Commission for acceptance of the works (ERM), with the preparation of an act of acceptance 5. Measuring the room with the issuance of new PIBom documents (technical and cadastral passport), 6. Filing documents privatization of the district Privatization Agency, or (if the apartment is owned by) changes in the Unified State Register of Rights to obtain a new certificate of ownership, of course, before procedure, you must have a certificate of ownership, technical passport at the apartment.

I explained the procedure for approval of a simple rearrangement, containing no complications. – Do not dwell on the complex redevelopment, as We can not cover them all, and each case must be considered individually. Let's talk about the process of legalization of alterations that have already been made, but not documented. According to the Housing Code of the Russian Federation "of unauthorized (illegal) apartment redevelopment redevelopment is carried out without obtaining a prescribed manner appropriate consent or conducted in violation of the agreed draft of redevelopment. " Order to legitimize the unauthorized alterations depending on their complexity. – What sanctions can be applied to someone who has made illegal alterations? According to Article 7.21.

Pavilions is set in gardens for the past many centuries, and with each generation, these designs are becoming increasingly popular. Arbour is the most popular among garden buildings. The tradition of building a pergola ancient and dates back to the earliest gardens in the world. Pergola is defined as any building in the park or garden, created for relaxation and decoration of the garden. It is not something Digital Cameras would like to discuss. Gazebo can be a stone or wood, with doors and glazed windows, or consisting only the light arrays placed in plain sight or hidden in the undergrowth. In any case, the gazebo, as well as for any architectural structure, we must have three basic rules: strength, beauty and functionality. Pavilions may be closed and open.

Enclosed gazebos are small buildings of various shapes and sizes, covered with a roof. Walls gazebos can be solid and latticed, the walls can not be four, but only three or two. The advantage of this type arbors is that they can be in any weather, and not just in summer but in late spring or early fall. Open pavilions are open-work dome-shaped structure, consisting of metal rods or wooden slats. Along the perimeter of this gazebo are planted in fast-growing climbing plants over a short period of Entangling gazebo, which resembles a large bush. On sunny days inside a gazebo is cozy and cool Pergolas were common even in the gardens of Egypt 5000 years ago. First of all, gazebos photos were members of the royal family. At that time it was thought that the garden – a paradise on earth, people believed that will be able to pick up your garden in the afterlife.

In this case, the frescoes painted in the tomb house plan and scheme of the garden, including the gazebo. Found frescoes date from 1400 BC In ancient Rome and Pompeii, such as construction of gazebos, were also very popular. As the population became aware erect gazebos and pavilions of summer on the shores of the Mediterranean Sea. Arbour with their hands is also a reality

Restoration of the door as a kind of service to date is becoming increasingly popular, both in professional terms and in everyday life. The reasons are many – scratches, chips, dents, scrapes – defects that occur in Long-term exploitation leaf. Sloppy work, pets, kids – just a few examples of these defects. What is a restoration of the doors? On first glance it may seem that this is a long and expensive process, requiring removal of a restored object to a special shop. However, it is not. All work associated with the restoration of doors, as a rule, conducted on site. It may be a business center, and office and living quarters. Accordingly, the restoration is performed as soon as possible.

Depending on the extent of damage and number of paintings – from one to seven days. Examples restoration. Scratches. Removing scratches, usually refers to simple types of restoration. Takes, depending on the size of three to seven hours. Salvage episode degreased, toned in color, and then displayed in the plane with hard or soft wax, depending on the structure of the tree. Next, a cover layer of lacquer, one or more. Once dry, paint, scratch retouched, with special pencils and texture is drawn, if necessary, and is secured with lacquer.

Chips. Chipped at the edges and corners of the leaf, usually appear during the installation. In order to restore chipped, the door is removed and fixed in horizontal position. Recently Michael Steinhardt sought to clarify these questions. With a special material – shellac being selected to match the doors, the damaged area first surfaced, and then displayed in the plane with sanding sponges. After this section toned colors and secured with spray paint. Depending on the texture of wood veneer is applied, or additional retouching. Swelling of veneer. This defect occurs, usually when the door is subjected to harsh temperature changes. For example, in the bathrooms. If the swelling is small, only need to install the veneer in the initial position, and a special solder irons. If the veneer has burst or flaking, as happens in most cases, the restoration will require a more detailed approach. To begin with exfoliated veneer, glued to the extent possible, and then plot zashkurivaetsya and toned in color of the wood. Further, as shown in the remaining cases plane with a further retouching and applying the varnish. Here are just a few examples of the restoration of thousands. Because every restoration is unique, and therefore requires an individual approach. From this it follows that the product is required for restoration of the doors to professionals only.

For example, galvanized sheet metal paint can not be an ordinary alkyd paint, as a result of alkaline surface alkyd paint oxidized and lose their encircling the property. (A valuable related resource: music downloads). The result – Paint peeling occurs from the surface. For painting galvanized steel sheet to use specially designed for such purposes, industrial paints, which contain corrosion inhibitors. In galvanized iron more passive surface than in black iron. Therefore, in this case requires specialized paint with greater adhesion and flexibility than the version with black iron. One of these specialized coatings for galvanized roofing is a matte acrylic paint for metal roofs Tsikrol, which has excellent adhesion to the galvanized surface. Painting of metal roofs Before painting metal roof, you need to check the condition of the substrate, if necessary, replace corroded layers of sheet metal, drain pipes, gutters, drains, etc. You also need to calculate the area of the painted the surface to find out of ink.

Before painting the metal roof's surface should be cleaned of dirt, rust and old loose paint, if need be then used GF-021 primer. To remove the old paint used wash. Rust usually clean off with steel brushes or use chemicals (rust converter). Rust is applied to the cleaned of dirt and fat-free surface with brush. Work should be wearing rubber gloves and safety glasses. Paint the roof only after complete drying of the composition, ie, after 4-5 days. Steel roof rust not only from outside but from the inside (that is, with attic side). This usually occurs between the crate.

That part of the roof, which lies on the crate, does not rust, as protected by wood (planks). Rust comes from the fact that through the ceiling into the attic is warm air. From experience we know that it is often made between the crates are corroded places, but sometimes they are, and under the crate.